Description
The PID-131-U is a standard PID controller designed for the general control of proportional loops. The control structure is implemented as a classic PID control system with feedforward. The unit is suitable for dynamic PID control of force, pressure, rotational speed and velocity.
Key features and characteristics of the PID-131-U:
- Analogue setpoints (0–10 V or 4–20 mA)
- Ramp function for the setpoint
- Universal regulatory framework
- Activation of the integrator based on the actual value via a programmable threshold (automatic control mode switching)
- Application-oriented parameterisation
- Output signal for universal control of actuators (0…10 V, ±10 V or 4…20 mA, or 4…20 mA with a virtual zero point at 12 mA)
- REMOTE CONTROL via the serial interface
- Error diagnosis
- Einstellung über USB-Schnittstelle
- Analogue signals can be defined as 4… 20 mA, 20… 4 mA, 0… 10 V or 10… 0 V. Any voltage or current range can be set via the range definition.
- Short cycle time of 1 ms
- Active differential output for direct connection of actuators (unipolar or bipolar)
- Switch input S0 for switching between two sets of control parameters
- The free WPC-300 programme, which features a built-in oscilloscope, is available to download from the internet.
Tariff No. / HS Code: 85371098
Data sheet: https://www.w-e-st.de/files/pdf/PID-131-U-DE.pdf
